HiPro Using the refrigerator
23
8 Using the refrigerator
A
I
8.1 Energy saving tips
•
Choose a well ventilated position which is protected from direct sunlight.
•
Put the refrigerator into operation about 12 hours prior to use.
•
Arrange the shelves evenly in the refrigerator compartment.
•
Allow hot food to cool down first before you put it in the refrigerator.
•
Do not open the refrigerator more often than necessary.
•
Do not leave the door open for longer than necessary. With the door open, the
interior light is lit continuously.
•
Avoid unnecessarily low temperature settings.
•
Adjust the room temperature to about 20 °C.
8.2 Positioning the shelves
➤ Proceed as displayed infig. f, page 12 until fig. g, page 12.
8.3 Positioning door rack
➤ Proceed as displayed in fig. h, page 12.
NOTICE!
•
Do not place any electrical devices inside the refrigerator.
Exceptions are devices approved for the purpose by the
manufacturer.
•
Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze. This can therefore
destroy glass containers.
•
Food may only be stored in its original packaging or in suitable
containers.
•
Ensure that the items placed in the cooler are suitable for cooling to
the selected temperature.
NOTE
•
Before starting your new refrigerator for the first time, you need to
clean it inside and outside with a damp cloth for hygienic reasons
(see also chapter “Cleaning and care” on page 26).
HiPro3000_4000_6000_Vision-IO-EN.book Seite 23 Dienstag, 27. November 2018 6:20 18
To Next Page
Loading...
Need help?
General