Dometic KTG smartCI 2.0 - Page 14

EN
Operating the system KTGsmartCI2.0
14
Calling up the menus
To open the desired menu, proceed as follows:
➤ Press the corresponding symbol on the navigation bar or …
➤ … press the corresponding symbol on the operating panel.
✓ The menu is displayed.
Setting functions and values
➤ Open the corresponding
Details menu.
➤ Press or to select a parameter.
➤ Press or to increase or decrease a value.
➤ Press or to increase or decrease a value.
➤ Press to return to the previous menu.
✓ The set functions and values are adopted by the system.
Using sensor keys
No. in
fig. 2,
page 3
Symbol Explanation
1 Open HOME main menu
2 Open SETTINGS menu
3 Main switch:
Switch selected 12 V consumer units and the lighting control unit
on and off
.7*VPDUW&,2VERRN6HLWH'RQQHUVWDJ-DQXDU