Dometic KTG smartCI 2.0 - Operating the System; Basic Operation

EN
KTGsmartCI2.0 Operating the system
13
5 Operating the system
5.1 Basic operation
Using the touchscreen
You can access menus and enter settings as follows:

by touching the sensor buttons

by touching a symbol on the navigation bar

by touching a symbol on the display
An activated function is displayed with a highlighted background.
Touch l ogic
If only one setting is available (e.g. air conditioner ON/OFF):
➤ Press the corresponding touch symbol.
✓ The corresponding setting is displayed.
If several settings are available (e.g. air conditioner modes or fan speeds):
➤ Press the corresponding touch symbol multiple times until you reach the desired
setting.
✓ The corresponding setting is displayed.
No. in
fig. 1, page 3
Explanation
1 Status bar
2 Control panel
3 Navigation bar
4 Sensor buttons
.7*VPDUW&,2VERRN6HLWH'RQQHUVWDJ-DQXDU