Dometic KTG smartCI 2.0 - Settings Menu

EN
Operating the system KTGsmartCI2.0
18
5.3 SETTINGS menu
SETTINGS display and control elements menu ( )
I
Symbol in
fig. 6, page 5
Explanation
Set the date
Set the time
Activate/deactivate wake-up alarm function
Set wake-up time
Switch wake-up alarm off
Zero point displacement (offset) interior temperature sensors
Zero point displacement (offset) outside temperature sensors
NOTE
The zero point displacement (offset) can be used to compensate for dif-
ferent values from different temperature sensors. These differences can
arise due to manufacturers’ tolerances and the installation position.
09.01.15
12:30
08:00
08:00
19°C
10°C
.7*VPDUW&,2VERRN6HLWH'RQQHUVWDJ-DQXDU