J
Jason GarnerJul 26, 2025
What to do if the flush cycle is not activated on my Dometic Toilet?
- DDr. Angelica Harrington MDJul 26, 2025
If the flush cycle on your Dometic Toilet isn't starting when you press the pedal, there are several potential causes: * First, check that the toilet is receiving electrical power by inspecting the wiring, circuit breakers, and fuses. * If the power supply is okay, the flush pedal itself might be faulty and need a switch replacement. * Alternatively, the circuit board could be malfunctioning, requiring replacement. * Also, if you have an optional tank monitor installed, a full holding tank might be cutting off power to the toilet. Try emptying the holding tank.