Installing the device PI8022, PI8023, MO9722
12
6 Installing the device
!
6.1 Selecting the installation location
When selecting the installation location, observe the following instructions:
• Make sure that minimum distances (fig. 3) are observed.
I
?
• Ensure that there are no drafts at the installation location.
WARNING!
Assembly and installation of the device must only be carried out by
licensed gas fitters. Incorrect assembly and installation can result in
serious hazards due to the escape of gas.
NOTE
* For PI8022 and PI8023 with glass lid the distance between the edge
of the cooktop to the back wall can be reduced up to 0 mm.
To Next Page
Loading...
