PI8022, PI8023, MO9722 General safety instructions
5
2 General safety instructions
2.1 General safety
!
WARNING!
• This device must only be repaired by qualified personnel. Improper
repairs can result in considerable danger or damage to the device.
• DO NOT MODIFY THIS DEVICE.
• Observe the allowed gas given in chapter “Technical data” on
page 30. Do not use any other fuels.
• Keep a suitable fire extinguisher in the immediate vicinity.
Ensure that the fire extinguisher is checked by a specialist in regular
intervals.
• DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS DEVICE WHILE
IT IS IN OPERATION.
• DO NOT USE OR STORE FLAMMABLE MATERIALS IN OR NEAR THIS
DEVICE.
• DO NOT USE AN UNLINED MASONRY CHIMNEY AS THE FLUE FOR
THIS DEVICE.
• DO NOT PLACE ARTICLES ON OR AGAINST THIS DEVICE.
• This device is not connected to a combustion products evacuation
device. It shall be installed and connected in accordance with
AS/NZS 5601.2 and all other relevant national and local regulations.
Particular attention shall be given to the relevant requirements regard-
ing ventilation.
!
CAUTION!
• In case of safety glass cover breakage:
– Shut off immediately all burners and any electrical heating element
and isolate the device from the power supply.
– Do not touch the device surface.
•Do not use the device.
2.2 Safety when operating with gas
!
WARNING!
• Keep flammable substances away from heating and cooking devices,
and other light and heat sources.
To Next Page
Loading...
Need help?
General
