10
STORAGE COMPARTMENTS
ICE CUBES
Ice cubes can be made in the freezer compartment. For
faster freezing, place trays in direct contact with the bottom
of the freezer compartment.
PRODUCT CARE
DEFROSTING
1. Shut off the refrigerator by pressing the main
power ON/OFF button (OFF position).
2. Empty the refrigerator.
3. Leave the cabinet and freezer doors open and
make sure the drip tray is in place under the
nned evaporator.
Defrosting time can be reduced by lling ice trays
with hot water and placing them in the freezer com-
partment.
4. When all the frost has melted, dry the interior
with a clean cloth and turn the refrigerator back
on.
RM2354, RM2454, RM2554, DM2662, DM2663, DM2862
& NDM1062
5. Set the thermostat to the coldest setting for a
few hours. Then, reset the thermostat to the
desired setting, usually at mid setting. Replace
food after refrigerator has reached appropriate
cool temperature.
FIRE AND INHALATION HAZARD. Do not use
a knife, ice pick, or any other sharp tool to
remove frost from the freezer compartment.
Failure to obey this warning could cause a
leak in the ammonia cooling system which
could lead to a re hazard resulting in death
or serious injury.
An ammonia leak also poses an inhalation
hazard, and could cause chemical burns to
the skin and eyes. Exposure to a high con-
centration of ammonia could result in death
or serious injury.
Do not use a hot air blower to remove frost
from the freezer compartment. Permanent
damage could result from warping the metal
or plastic parts.
AIRING POSITION
DM2652, DM2662, DM2663, DM2852 &
DM2862
Use the airing position card
to keep the doors ajar if the
refrigerator is put in storage
or will not be used for an ex-
tended period of time.
1 2
543
RM2351, RM2454, RM2554, DM2662, DM2663, DM2862
& NDM1062
Ice will be made more rapidly if the thermostat is set at its
highest position, but be sure to move the thermostat back
to normal setting when ice is formed; the refrigerator might
otherwise become too cold.
To Next Page
Loading...
Need help?
General
