proSafe Using the safe
17
➤ Press the ENTER button.
➤ Repeat the entry of the new six digit R.E.O.S. code within ten seconds.
➤ Press the ENTER button again.
✓ The safe confirms the change of the R.E.O.S. code with an audio tone.
8.4 Emergency opening with the master key
A
Opening the safe with the master key
The safe can be opened in all eventualities with the master key, even in the event of
an electronic fault.
➤ Remove the plastic cover which covers the key hole with the knob key.
➤ Put the master key into the key hole (fig. 4, page 4).
➤ Open the safe by turning the master key 180° to the right.
✓ The bolts extend mechanically.
Change guest code with the master key
The safe can be opened with the master key in case that the guest forgot his code.
➤ Open the safe with the master key.
➤ Keep the master key in this position and open the door.
➤ Enter a new four digit code.
➤ Turn the master key 180° to the left and remove the master key.
✓ The safe can be opened with the new code.
NOTICE!
No unauthorised persons should have access to the master key.
Store the master key very carefully in a safe location.
MD-IO-16s.book Seite 17 Freitag, 4. August 2017 9:25 09
To Next Page
Loading...
