Dometic PW1000 - Disposal

EN
Disposal PerfectWall
14
Programming the remote control and the wall switch
➤ Place the battery (see fig. n 1, page 2).
➤ Switch on the power supply.
✓ The receiver beeps once briefly.
➤ Press the programming button (fig. n 2, page 2) or the buttons and on
the wall switch simultaneously (fig. o 1 and 2, page 2) within 4 seconds.
✓ The receiver beeps once briefly.
➤ Press the programming button (fig. n 2, page 2) or the buttons and on
the wall switch simultaneously (fig. o 1 and 2, page 2) again briefly.
✓ The receiver beeps once briefly.
➤ Briefly press the button (fig. o 3, page 2).
✓ The receiver beeps four times briefly.
✓ The awning moves briefly.
Proceed as follows to pair the wall switch:
➤ Press the programming button (fig. n 2, page 2) twice.
✓ The receiver beeps twice briefly.
➤ Press the buttons and on the wall switch simultaneously (fig. o 1 and 2,
page 2).
✓ The receiver beeps five times briefly.
✓ The remote control or wall switch and awning are now set to one another.
8Disposal
➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
3:B3:B3:,VERRN6HLWH)UHLWDJ6HSWHPEHU
More information https://www.caravansplus.com.au