To Next PageTo Next Page
Need help?Do you have a question about the Dometic RH341LD and is the answer not in the manual?
General| Brand | Dometic |
|---|---|
| Model | RH341LD |
| Category | Refrigerator |
| Language | English |
Introduction to Dometic cooling miniBars and their model series like Greenline, Face-lifting, and HiPro.
Specific model numbers (3120, 3130) covered by this service instruction.
Comparison of Face-lifting, Greenline, and Previous model generations and their features.
Key changes introduced when transitioning between model generations.
Details on the automatic defrost cycle timing and operation for the refrigerator.
Explanation of air and evaporator sensor roles, connections, and importance.
Information on the optimized cooling unit and replacement procedures, including heating shell.
Procedure for measuring heating shell resistance and identifying faults.
How the interior lighting is activated by a proximity switch and magnet.
Step-by-step instructions for replacing the interior lighting bulbs.
Details on lighting components for RH356LD/LDE and RH456LD/LDE models.
Instructions for replacing light bulbs on RH356LD/LDE and RH456LD/LDE units.
Specific clearance and ventilation requirements for proper installation.
Diagrams illustrating different ventilation ducting options (A, B, C, D).
Table of recess dimensions in mm for various miniBar models.
Instructions for securing the miniBar unit to furniture using screws and caps.
Procedure for changing the sliding hinge mechanism on the appliance door.
Guidelines for ensuring correct clearance between the cupboard door and the miniBar.
Step-by-step guide for replacing the decorative front panel of the miniBar.
Explanation of the mechanical ADC system and its indication of door status.
Procedure for resetting the mechanical ADC for different miniBar models.
Detailed steps for removing and replacing the mechanical ADC component from the doorframe.
Description of the electrical ADC, its approximation switch, and wiring.
Information on service kits available for retrofitting the electrical door control.
Details of the service kit and part number for retrofitting electrical ADC on specific models.
Step-by-step guide for mounting the electrical door control system.
Installation steps for the sensor, clip, terminal strip, and cable connections.
Service kit information for RH355/356 models, including notes on feet height.
Installation guide for the electrical door control on RH355 and RH356 models.
Mounting the terminal strip and adjusting feet for electrical door control installation.
Mounting instructions and fixing details for the SKE160 miniSafe.
Mounting instructions and fixing details for the SKE180 miniSafe.
Recommendations for storing goods inside the miniBar to prevent overloading.
Information on warranty coverage regarding improper use and modifications.
Diagnosing and resolving 'no cooling' issues for cold and warm cooling units.
Practical tips for optimizing energy consumption and efficiency of the miniBar.
Technical specifications for RH330, RH340, RH341, RH355, RH356, RH360, RH361, RH136, RH137 models.
Technical specifications for RH430, RH440, RH441, RH455, RH456, RH460, RH461, RH436, RH447 models.
Technical specifications for various miniSafe models (SK160, SKE160, SKE180, SKE190).
Wiring diagram for refrigerators without interior lighting.
Wiring diagram for refrigerators equipped with interior lighting.
Wiring diagram for refrigerators with 55/56 litre capacity.
Overview of HiPro models, their technology, design, and benefits.
Explanation of HiPro electronic system, temperature settings, and remote control.
Process of the electronic system's self-test and sensor resistance measurement.
How the system signals errors through flashing lights and fault analysis.
Details on the automatic defrost timing for HiPro refrigerators.
Procedure for checking the cooling unit and identifying system errors.
Operation cycle of the heating shell in the HiPro system.
Description of HiPro interior lighting LEDs and infrared sensors.
Explanation of the LED indicator for the automatic door control status.
Specific actions for operating the HiPro system, including resets and temperature changes.
References to installation and securing procedures covered in earlier sections.
Best practices for energy saving operations for HiPro miniBars.
Manual troubleshooting steps for 'no cooling' issues in HiPro models.
Technical data for HiPro 3000 and HiPro 4000 models.
Detailed wiring diagram for the HiPro electronic system and its connections.
