How to fix Dometic RM 8555 not cooling in gas operation mode?
If your Dometic Refrigerator isn't cooling while in gas operation mode, make sure the gas cylinder isn't empty and replace it if it is. Check that the upstream shut-off device is open. If there's air in the gas pipe, switch off the appliance and start it again; repeat this procedure 3-4 times if necessary.
Why is my Dometic Refrigerator not cooling enough?
There are several reasons why your Dometic Refrigerator might not be cooling sufficiently. It could be due to inadequate ventilation, so check that the ventilation grilles are not covered. The thermostat setting might be too low, so try setting it to a higher level. A heavily frosted condenser can also cause this issue, so ensure the refrigerator door closes properly. Avoid storing too much warm food at once, and allow food to cool before storing it. Also, the appliance needs time to cool down, so check after 4-5 hours of operation. High ambient temperatures can also affect cooling, so regularly remove ventilation grilles.
How to fix a Dometic Refrigerator that does not cool sufficiently?
If your Dometic Refrigerator isn't cooling sufficiently, here are a few things to check: * Ensure that the ventilation grilles are not covered. * Try setting the thermostat to a higher level. * Make sure the refrigerator door closes properly. * Allow warm food to cool down before placing it inside. * Check if the cooling compartment starts working after about 4 to 5 hours. * Regularly remove the ventilation grilles.
Why is my Dometic Refrigerator not cooling in gas operation mode?
If your Dometic Refrigerator isn't cooling while in gas operation mode, consider these solutions: * Replace the gas cylinder. * Ensure the shut-off device is open. * Try switching the appliance off and on again. Repeat this process 3-4 times if needed.
What to do if Dometic Refrigerator flame not ignited in GAS/Auto mode?
If the flame is not igniting in GAS/Auto mode on your Dometic Refrigerator, ensure that the gas supply is turned on and that the igniter is functioning correctly.
What to do if Dometic RM 8555 does not cool in 12V operation?
If your Dometic Refrigerator isn't cooling when running on 12V, consider the following: * The on-board fuse may be defective. Try fitting a new fuse. * The on-board battery might be discharged. Check the battery and charge it if necessary. * The engine may not be running. Start the engine. * The heating element might be defective. Please contact Dometic Customer Services for assistance.
What to do if Dometic Refrigerator does not cool in 230V operation?
If your Dometic Refrigerator isn't cooling when running on 230V, consider the following: * The on-board fuse may be defective. Try fitting a new fuse. * The vehicle may not be connected to mains supply voltage. Connect to a mains power supply. * If it is AES, gas operation might be engaged despite connection to the mains supply voltage. In this case (automatically switches back to 230V operation) contact Dometic Customer Services. * The heating element might be defective. In this case contact Dometic Customer Services.
How to fix a Dometic RM 8555 Refrigerator that does not cool in gas operation mode?
If your Dometic Refrigerator isn't cooling when in gas operation mode: * The gas cylinder might be empty. Change the gas cylinder. * The upstream shut-off device might not be open. Open the shut-off device. * There might be air in the gas pipe. Switch off the appliance and start again. Repeat this procedure 3 - 4 times, if necessary.
What to do if my Dometic Refrigerator does not cool in 240V operation?
If your Dometic Refrigerator isn't cooling when running on 240V, check the on-board fuse and replace it if it's defective. Ensure the vehicle is properly connected to a mains power supply. If you have an AES (Automatic Energy Selector) model, it might switch to gas operation if the mains supply voltage is insufficient; it will automatically switch back to 230V when the voltage is adequate. If these steps don't resolve the issue, please inform the Dometic Customer Service, as the heating element might be defective.
What to do if my Dometic RM 8555 does not cool in 12V operation?
If your Dometic Refrigerator isn't cooling when running on 12V, start by checking the on-board fuse and replace it if necessary. Make sure the on-board battery isn't discharged; check it and charge it if needed. Ensure the engine is running. If these steps don't fix the issue, please inform Dometic Customer Service, as the heating element might be defective.
General| Type | Absorption refrigerator |
|---|---|
| Input Voltage (AC) | 230 V |
| Input Voltage (DC) | 12 V |
| Gas Pressure (DIN900) | 30 mbar |
| Width | 525 mm |
| Depth | 500 mm |
| Power Supply | 12V DC, 230V AC, Gas |
| Energy Source | 12V DC, 230V AC, LPG |
Overview of the Dometic Absorption Refrigerator, its features, and benefits.
Instructions on how to read and understand the manual for safe and correct operation.
Explanation of symbols used to denote dangers, warnings, and cautions in the manual.
Information regarding warranty terms, customer service access, and ordering replacement parts.
Guidance on coolant, disposal, and tips for energy-efficient refrigerator operation.
Confirmation of compliance with relevant EU directives and standards.
Ensuring correct application and understanding user responsibilities for safe operation.
Precautions for child safety during disposal and safe handling of the appliance.
Guidelines for working on gas/electrical systems and avoiding fire/explosion hazards.
Information on coolant (ammonia) and critical safety rules for gas operation, including prohibitions.
Safe practices for storing food and considerations for refrigerators with electronic systems (MES/AES).
Decoding the model number structure to identify refrigerator series, width, and depth.
How to locate and interpret the rating plate for essential information like model, product, and serial numbers.
A comprehensive table detailing dimensions, capacities, power consumption, and weights for various models.
Diagram illustrating and explaining the function of key refrigerator components.
Guidance on using Mains (230V), DC (12V), and Gas power modes, including automatic selection.
Explanation of operating controls and specific functions for different model series (RM 8xx0, RM 8xx1, RM 8xx5).
How to set the cooling temperature and utilize automatic energy selection (AES) for optimal performance.
Instructions for door locking, interior lighting, and positioning storage racks.
Best practices for storing food, making ice cubes, and the procedure for defrosting the unit.
A guide to troubleshooting common refrigerator failures, their causes, and solutions.
To Next Page
