10. Removing the air pump and replacing the piston.
1. Unscrew knob (A, Fig.9) of air pump (K, Fig.9) from the shaft (L, Fig.9).
2. Unscrew air pump ( 4 screws / M, Fig. 9).
3. Unscrew cover of air-pump ( 2 screws / N, Fig. 9).
4. Withdraw shaft, force out retaining disc from the groove, pull off large disc and change joint ring.
5. Reassemble in the reverse order.
CAUTION: After all repairs to the gas equipment, the entire gas system must be checked for leaks with soapy
solution.
NEVER USE A MATCH
E. WIRING DIAGRAM
To Next Page
Loading...
