11
REMOVING AND REPLACING THE
SHELVES
1. Remove the shelf locks by inserting the tip of
a at bladed screwdriver into the slot of the
locks. Turn the screwdriver counterclockwise
and then remove the shelf locks from the wire
shelf.
2. Tilt the shelf to one side at an angle while pul-
ling forward.
3. Reposition the shelf in the desired location.
Insert the ends of the wire shelf on the left-
hand side and slide the shelf into the holes on
the right-hand side.
4. Slide the plastic plugs into the holes of the
wall.
5. Snap the shelf locks onto the wire shelf.
To Next Page
Loading...
