16
Refrigerator operation
3. Piezo igniter: activate knop (3) several
times at intervals 1-2 seconds.
Battery igniter: press knob (3) of battery
igniter down and keep it depressed. The
ignition process is activated automatically.
4. Once the flame ignites, the pointer of galva-
nometer (4) begins moving into the green
range. The refrigerator is operational. Keep
knob (2) depressed for approx. 15 seconds
and finally release it.
Fig. 12Fig. 11
Fig. 9 Fig. 10
1. Turn the rotary selector switch (1) to positi-
on .
2. Turn the temperature selector (2) clockwise
and push. Keep the controller button
depressed.
1
2
2 3 4
Fig. 15
Fig. 14
Open / close
4.3.3 Setting of cooling compartment
temperature
position (large bar =
lowest temperature).
Note: The temperatu-
re levels do not relate
to absolute tempera-
ture values.
Select the desired cooling compartment tem-
perature by turning the rotary knob (2) .
The scale starts with MIN position (small bar =
highest temperature) and climbs up to MAX
Fig. 13
2
n Please select the medium setting (A) for
ambient temperatures between +15°C and
+25°C. The unit operates within its opti-
mum performance range.
n 12V operation: The refrigerator operates
without thermostatic control (continuous
operation).
i
A
4.4 Door locking
As a basic rule, shut and lock the refrige-
rator before you start your journey!
CAUTION!
Open the door by pressing the locking button
and pull open. Shut the door again by pushing
it to close.
The door is correctly closed for operation
while travelling when you hear a clear
"click". Ensure you hear this noise.
open / pull
close / push
CLICK
289 0111-20_EN_RML8230-B_N1_Layout 1 13.04.2015 10:28 Seite 16
To Next Page
Loading...
