2
EN
Contents Product Description
1 Explanation of Symbols and Safety
Instructions ............................ 2
1.1 Recognize Safety Information .............2
1.2 Understand Signal Words ................2
1.3 Safety Information ......................2
2 General Information ..................... 3
3 How The System Works .................. 3
3.1 DCM Features .........................3
3.2 Wireless Key Fob for DCM Features ........3
3.3 Layout ................................4
3.4 Key Fob Mounting Kit ...................4
3.5 Key Fob Pairing Procedure ...............4
3.6 Key Fob Battery Replacement ........... 5
3.7 Switching Pages on MFD ............... 5
3.8 Top/Bottom Ribbon Setup ............. 6
3.9 Side Bar Setup ....................... 7
3.10 Change Switching Page Name .......... 8
3.11 Replace Switches ..................... 8
3.12 Edit Switch Name ..................... 9
3.13 Warning Manager ..................... 10
3.14 Update DCM Configuration File .......... 11
4 Troubleshooting Guide ................. 13
3.1 DCM Troubleshooting ................. 13
3.2 NMEA 2000 Network Troubleshooting ... 16
5 New Boat Checklist ..................... 17
6 Warranty Information ................... 18
5.1 Statement of Limited Warranty ........... 18
5.2 Return Goods Procedure ............... 18
5.3 Technical Support ..................... 18
Contents
Service Center & Dealer Locations
Visit: www.dometic.com
Read these instructions carefully. These instructions
MUST stay with this product.
1 Explanation of Symbols and
Safety Instructions
Thank you for choosing DCM Digital Switching
Controller. This User Manual and Troubleshooting Guide
contains all the information that you and others will
require for the safe use of the DCM Digital Switching
Controller and MUST remain on board the boat.
Throughout this manual, information for the safe use of
the controller will be distinguished in one of the
following ways:
1.1 Recognize Safety Information
This is the safety alert symbol. It is used to alert
you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid
possible injury or death.
1.2 Understand Signal Words
A signal word will identify safety messages and property
damage messages, and also will indicate the degree or
level of hazard seriousness.
WARNING
Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE: Indicates an area or subject of special merit,
emphasizing either the product’s capabilities or common
errors in operation or maintenance.
1.3 Safety Information
The safety information provided below is intended to
inform you of the dangers that may be present before,
during and aer the installation. It is critical that you read
and understand ALL the points noted:
• Read and follow all safety information and
instructions.
• Read and understand these instructions before
[installing/ operating/ servicing] this product.
To Next Page
Loading...
General