BordBar TB08 Operation
11
Switching the device on and off
➤ Plug the DC connection cable (fig. 3 A) into the cigarette lighter socket in the
vehicle.
➤ Push the slide switch into the required position.
✓ The cooler is switched on and starts cooling or heating the interior.
✓ The respective LED lights up.
➤ If you want to switch off the cooler, disconnect the plug.
Using the lock for the lid
You can keep the lid of the cooler open by hooking the chain in the screws on the
inside (fig. 4 ).
AB
TB08-O-AU.book Seite 11 Freitag, 7. Oktober 2016 12:55 12
To Next Page
Loading...
