17
Electrical Specifications
Line Voltage 208 To 240 VAC
Frequency 50 or 60 Hz
Phase 1 ph
Chilled Water Pump Output 12 Amps @ 230 V
Sea Water Pump Output 12 Amps @ 230 V
VFD Input 22 Amps @ 230 VAC
VFD Output 12 Amps @ 230 V
Max Breaker 25 Amps @ 230 VAC
Note: Increase breaker size to include pump current if running pumps directly off system.
Maximum Ambient Operating Temperature 140°F (60°C)
Maximum Rh Conditions 99% Non-Condensing
Installation Requirements:
Follow Standard Chiller Installation manual. In addition a recommended 8 to 10 inches keep out
from the back of the unit in case the VFD must be removed.
To Next Page
Loading...
