Need help?Do you have a question about the DOMUSA TEKNIK EVOLUTION EV 25 HAM and is the answer not in the manual?
Optimal placement for ventilation and maintenance access.
Instructions for water circuit connections, cleaning, and pressure.
Requirements for connecting the boiler to the electrical supply.
Procedure for connecting the oil burner fuel supply line.
Steps for connecting the optional underfloor heating kit.
Guidance for connecting a second heating circulation pump.
Recommended distances for external exhaust pipe positioning.
Steps to modify for external air intake operation.
Details on using dual-duct exhaust systems.
Instructions for converting to a coaxial exhaust system.
Details on horizontal coaxial exhaust systems.
Details on vertical coaxial exhaust systems.
Guide to setting the desired heating temperature.
Guide to setting the domestic hot water temperature.
Setting the flow temperature for underfloor heating systems.
Details on how the boiler heats the installation and operates.
Explanation of the instantaneous DHW production system.
Operation of the boiler with the optional underfloor heating kit.
Operation of the boiler's second heating circuit.
Protects circulation pumps from seizing when idle.
Protects the boiler and installation from freezing.
Monitors system pressure and triggers alarms for deviations.
Enables remote boiler control via a telephone relay.
Connecting room thermostats for temperature-controlled heating.
Prevents accidental changes to control panel settings.
Boiler stops if internal temperature exceeds safety limits.
Boiler stops due to an anomaly detected in the burner.
Boiler stops if system pressure falls below the minimum threshold.
Steps for cleaning the boiler body, combustion chamber, and condenser.
Recommendations to prevent frost damage during cold weather.
Guidelines on water quality to prevent scale buildup.
Graphs showing pump head vs. flow rate.
Instructions for adjusting the circulation pump speed.
Diagrams showing pressure drop across the system.
Instructions for physically installing the burner unit.
Procedure for initial ignition and priming of the burner.
Steps for optimizing flame and air for efficient combustion.
Procedure for setting the oil pump pressure.
Illustrations for correct fuel line installation without reductions.
Performance data and electrical specifications of the burner.
Details on specific burner nozzles and their adjustment settings.
Wiring diagram for burner-specific electrical components.
Instructions for connecting and disconnecting fuel intake lines.
Explanation of the burner control box LED status indicators.
Identification and causes of burner error codes and their resolution.
Common boiler problems, their causes, and suggested solutions.
General| Brand | DOMUSA TEKNIK |
|---|---|
| Model | EVOLUTION EV 25 HAM |
| Category | Burner |
| Language | English |
To Next Page