17
ENGLISH
FC 50 CONSOLE
SETTING
1. Remove the console from its holder, take the
battery compartment lid off (located on the
rear of the product) and insert two AA or
UM-3 batteries in the battery compartment
behind the screen.
2. Make sure the batteries are installed cor-
rectly and are flush with the springs.
3. Put the battery compartment lid back on and
check to ensure that it is secure.
4. If the display is illegible or partial, remove
the batteries, wait 15 seconds and then put
them back in.
5. If you remove the batteries, the computer
memory is erased.
RECYCLING :
The “crossed-out bin” symbol indicates that this product and the batteries it contains cannot be disposed of with household waste.
They are subject to specific sorting.
Take the batteries and your unusable electronic product to an authorised collection area for recycling.
Recycling your electronic waste will protect the environment and your health.
INSTALLING THE BATTERIES
RESET
3
4
1
2
Below are the settings for the buttons on your VM 190 bike.
Mi Km
3
Choose km/h or Mi/h according to your country:
4
Press the RESET button.
If there is a setting error, an error message will appear on the console
Err
. Check the position of the cursors.
The «click» of the cursor confirms it is in the right position.
VM 0 VE
1
Put the first cursor into “VM” position for your VM190:
RO 0 ST
2
Put the second cursor into “0” position
To Next Page
Loading...
Need help?
General
