EasyManuals Logo

Domyos VM 190 User Manual

Domyos VM 190
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
18
ENGLISH
AUTOSCAN: Alternate display of functions every 5
seconds.
RESETTING THE PRODUCT TO ZERO:
The product goes into standby mode after five minutes of
inactivity.
The indicators are reset to 0 when the product goes into stan-
dby mode (data is not saved).
This console is fully automatic and turns on as soon as you start pedalling.
DISPLAY
AUTOMATIC CONSOLE
1 - Speed:
This function displays an estimated speed.
This distance may be either in km/h or mph, depending on the
position of the switch on the rear of the product.
2 - Distance:
This function indicates estimated distance covered since the begin-
ning of the workout.
This distance may be displayed either in km or miles, depending on
the position of the switch on the rear of the product.
3 - Calories:
This function displays an estimation of calories expended since the
beginning of the session.
4 - Time:
This function indicates the time elapsed since the beginning of the
workout.
This is indicated in “Minutes: Seconds for the first hour, then it swit-
ches to “Hours: Minutes”.
After 10h the counter is automatically reset to 0.
IMPORTANT: For several dozen seconds or when there is a rapid
change in heart rate, the value displayed may not match your actual
heart rate.
This is due to the mechanism starting up.
FUNCTIONS:
- If you note that the counter does not display the correct units of distance, check that the switch behind the console is in the Mi position to
display in miles, and in the Km position to display in kilometres. Remove and replace the batteries for the change to take effect or press
the RESET button.
- If you note abnormal distances or speeds or if an «ERR» message appears, check that the switch behind the console is in the VM position
for a magnetic bike and VE for an elliptical bike, then press the RESET button.
On magnetic bikes, each turn of the pedals corresponds to a distance of 4 metres; on elliptical bikes, two turns correspond to a distance of
1.6 metres (these values correspond to average bike-riding or walking speeds.)
TROUBLESHOOTING

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Domyos VM 190 and is the answer not in the manual?

Domyos VM 190 Specifications

General IconGeneral
BrandDomyos
ModelVM 190
CategoryExercise Bike
LanguageEnglish

Related product manuals