Donaldson Torit 80 Series User Manual

Models 54-84 Shown
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
This manual is property of the owner. Leave with the collector when set-up and start-up are complete. Donaldson Company reserves the
right to change design and specifications without prior notice.
Illustrations are for reference only as actual product may vary.
Cabinet Collector
Series 50-90
Models 54, 64, 66, 75, 81, 84, 90
Installation and Operation Manual
Installation, Operation, and Service Information
IOM 7509401 (ENG)
Revision 6
English
Master Language

Donaldson Torit 80 Series Specifications

General

Model	80 Series
Filter Type	Cartridge
Dimensions	Varies by model
Weight	Varies by model
Filter Area	Varies by model
Construction	Heavy-gauge steel
Inlet Diameter	Varies by model
Dust Collection Capacity	Varies by model
Housing Material	Carbon steel
Pressure Drop	Varies with filter loading
Filter Cleaning System	Pulse-jet cleaning

Summary

Rating and Specifications

Operation

Installation Codes and Procedures

Installation

Foundations or Support Framing

Instructions for preparing the foundation or support structure for the collector.

Collector Location

Rigging Instructions

Hoisting Information

Standard Equipment

Provisional Anchor Bolt Recommendations

Electrical Wiring

Safety precautions and compliance requirements for electrical connections.

Preliminary Start-Up Check

Maintenance Information

Operational Checklist

Filter Removal and Installation

Procedures for safely removing and installing filter media.

Filter Pack Maintenance

Daily and routine procedures for cleaning and maintaining filter packs.

EZ Filter Pack Removal - Models 54-84

EZ Filter Pack Installation - Models 54-84

Filter Removal - Model 90

Filter Installation - Model 90

Dust Disposal

Ductwork

Magnehelic® Gauge

HEPA Filter

Models 60 and 70

Model 80

Troubleshooting

Parts and Service