DongFeng Nammi 01 - Page 145

When Driving
3
-
145
-
Driving Assistance
Factors Affecting the Function
Refer to the "Factors Affecting the Function"
section under "Trafc Sign Recognition System
(TSR)*" for factors that may affect the Intelligent
Speed Assist functionality.
Cruise Speed Control
The Intelligent Speed Limit Control
function uses the camera to obtain speed limit
information.When the effective speed limit
obtained and the current cruise speed set on the
instrument cluster differ by more than -10 km/
h, -5 km/h, or -10 km/h (set in the MP5 display),
ISLC prompts the driver with an operation pop-
up reminder at the designated location on the
instrument cluster.This pop-up reminder ashes
briefly and then remains static for a short time.
If the driver confirms within the prompted time
range, the pop-up reminder ends, and the set
cruise speed is updated to the effective speed
limit, with ISLC controlling the vehicle speed. If
the driver does not conrm within the prompted
time, the pop-up reminder ends after the vehicle
travels a certain distance.
Speed Limit Reminder
The vehicle's camera starts displaying the
speed limit when approaching a speed limit sign
and stops displaying after a certain distance.
If a vehicle changes lanes or the camera
recognizes a speed limit cancellation sign during
the camera-obtained speed limit reminder
process, the function will end the speed limit
reminder in advance.
Overspeed Alarm
When the vehicle's speed displayed on
the instrument cluster exceeds the set speed
deviation value, an overspeed alarm is triggered.
The alarm consists of the speed limit sign icon
ashing and a buzzer alarm. The ashing stops
when the vehicle speed on the instrument
cluster falls below the limit or after continuous
overspeeding for a certain time.