What to do if DongFeng E70 shows U3003 error?
If your DongFeng Automobile displays a U3003 error, it could be due to abnormal battery voltage or abnormal BCU collection. To resolve this, check the wire harness or replace the BCU. Also, the error may be caused by low or high battery voltage. In this case, please check the battery.
What causes internal fault of water pump in DongFeng E70 Automobile?
An internal fault of the water pump in your DongFeng Automobile may be caused by issues with the line, the pipeline, or the water pump status itself. Inspect each of these components to identify the problem.
What to do if DongFeng E70 shows high system pressure?
If your DongFeng Automobile indicates high system pressure, test the circuit and verify the pressure. The condenser might have poor heat dissipation. If necessary, seek service from professional personnel.
What to do if DongFeng Automobile has abnormal battery voltage?
If your DongFeng Automobile experiences abnormal battery voltage, it might be caused by abnormal battery voltage or BCU collection issues. Check the wire harness or the EXV to resolve this.
What to do if sensor is open in DongFeng E70 Automobile?
If the sensor is open in your DongFeng Automobile, check the wire harness and the sensor. If the collection circuit is abnormal, replace the BCU.
What to do if DongFeng Automobile sensor has short or open?
If your DongFeng Automobile sensor has a short or open, check the wire harness and the sensor. Alternatively, consider replacing the BCU.
Procedure for removing and refitting the tire pressure sensor.
Procedure for removing and refitting the TPMS control unit.
Procedure for wireless learning of tire pressure sensors without tools.
Procedure for tire pressure sensor learning using diagnostic tools.
Procedure for removing and refitting the steering wheel angle sensor.
Procedure for calibrating lateral and longitudinal acceleration sensors.
General| Brand | DongFeng |
|---|---|
| Model | E70 |
| Category | Automobile |
| Language | English |
To Next Page
