Replacement of steering wheel buttons
assembly
1- Protection
Place protective pads at following positions:
• Front fender;
• Front bumper;
• Driver’s seat;
• Carpet (on driver's side);
• Steering wheel;
• Parking brake lever;
• Shift lever.
3 - Removal
• Turn off the ignition switch, and disconnect
the battery negative cable.
• Remove the driver’s frontal airbag. (Refer to
"Removal and Refitting of Driver’s Frontal
Airbag" in "Supplemental Restraint System”
section.)
• Remove the fixing screws (1) of the steering
wheel back buttons with a Phillips
screwdriver. (one for left/right side)
To Next Page
Loading...
Need help?
General
