DongFeng Nammi 01 - Reverse Camera

-
148
-
When Driving
3
Reverse Camera*
When the gear is shifted to the "R" (reverse)
position, the MP5 display screen automatically
switches to show the view behind the vehicle.
This system helps the driver observe the
scene behind the vehicle via the display screen,
helping to avoid damaging the vehicle.However,
there are blind spots in the camera's field of
view, such as small objects under the bumper or
objects close to the rear and side corners of the
bumper.
Reverse Camera Position
The reverse camera is located in the middle
of the rear bumper, above the license plate.
Parking Assistance
Situations When the Camera May Not Work Properly
● Driving in stormy weather or fog;
● When the camera's surface is iced over or
covered in mud, dust, or snowakes;
● Reversing at night without rear lights.
WARNING
!
● Due to individual visual differences,
vehicle movement, and the shape of
obstacles, the distance estimated on the
display screen may differ from the actual
distance.
● Keep the camera clean and ensure it is
not covered in mud, frost, or snow.
Reverse Camera Operation Tips
The system requires some time to initialize
when activated. If the display is not clear due to
very high or low temperatures or very bright or
dark lighting conditions, it is not a malfunction.
Shadows of objects might appear on the display
screen. This is due to sunlight reecting off the
bumper and is not a malfunction.
Under fluorescent lights, the images
displayed on the screen might icker.This is not a
malfunction.
The color of objects on the display screen
might differ from their actual color.
If the rear-view camera is covered with dirt,
rain, or snow, the objects displayed may not be
clear.Clean the rear-view camera in such cases.