-222-
Maintenance
7
CAUTION
After changing wheels, calibrate the tire
pressure monitoring sensors for the new
wheels, or the system may not receive tire
pressure signals from that wheel, preventing
warnings even if the tire is underinflated.
If unable to perform calibration, contact an
authorized dealership.
WARNING
!
Dirt on the wheel and brake disc contact
surface can cause wheel bolt loosening,
leading to wheel detachment and traffic
accidents. Therefore, when changing wheels,
clean rust or dirt from the contact surface.
Wheels are dynamically balanced at the
factory, but several factors can affect wheel
balance during use.
Dynamic imbalance in wheels can cause
wheel wobble, abnormal tire wear, and impact
driving stability. Regularly check wheel balance
at an authorized dealership.
Wheel Dynamic Balance Check
Check the vehicle's tire information label to
understand the required tire model and size.
On the same axle, use tires of the same
brand, model, size, pattern, and wear level.
Tire Selection and Replacement
Buying New Tires
Tires and Wheels
To Next Page
Loading...
