-
25
-
Safety
1
Seat Belt
The seat belt retractor will lock the seat belt
in the following three situations:
● When the seat belt is rapidly pulled out
from the retractor;
● When the vehicle decelerates quickly;
● When the seat belt retractor is tilted at a
large angle.
To check the reliability of the seat belt,
grasp the upper part of the seat belt and pull it
quickly; at this point, the retractor should lock the
seat belt. If the retractor does not lock, go to a
dealership for inspection or repair.
Seat Belt Reliability Check
Regularly check the seat belt and all
its components (such as buckles, tongues,
retractors, straps) for proper operation.
If any part of the seat belt is damaged, the
strap is frayed, or other damages are found,
replace the entire seat belt assembly. If there is
dirt on the upper guide ring of the seat belt, the
retraction speed of the seat belt may be slow, so
it should be wiped clean with a clean, dry cloth.
When cleaning the seat belt strap, use
neutral soap water or a solution suitable for
cleaning car interiors and carpets.After cleaning,
the seat belt strap should be completely dried
before use.Do not retract a wet strap into
the retractor, as it may cause damage to the
retractor.
When the following situations occur, please
go to a dealership for repair as soon as possible:
● When the vehicle has a frontal collision, but
the seat belt tensioner does not work.
● When the seat belt retractor and surrounding
components are scratched, cracked, or
otherwise damaged.
Go to a dealership for seat belt inspection
and repair.
When disposing of the seat belt retractor,
you must comply with relevant safety regulations.
dealerships are familiar with these regulations
and can provide consultation services.
Maintenance of Seat Belts Repair and Disposal of Seat Belts
To Next Page
Loading...
