Donner Noise Killer - Features and Components; Two Modes; Carefully Selected Components; Features List

Connections & Controls
level, and done.
●Two Modes
The Noise Killer offers two noise
reduction modes for satisfying different
musicians. For most scenarios, set it to
SOFT mode; if you need stronger noise
reduction, set it to HARD mode.
●Carefully Selected Components
The Noise Killer is designed and built
with carefully selected components to
ensure best sound quality and road
performance. The solid Aluminum-alloy
chassis ensures touring reliability, and
True Bypass design gives you a
transparent tone.
Features
●Compact dual-mode noise gate pedal
●Fast noise detection, sensitive but
smooth noise reduction
●Wide threshold range suitable for
every music style
●True bypass provides transparent
tone
●LED indicator shows the working
state
●Enduring, light-weighted Aluminum-
alloy chassis
a
b
c
d
e
Specifications
Power Requirement: 9V DC center
negative
Current Consumption: 26mA
Dimensions: 42x93.5x52mm
Weight: 230g
a
c
d
b
www.donnerdeal.com
f
e
f
DC 9V Jack:
For power supply, use a 9-volt DC
regulated by AC adapter, 500mA
(plug polarity is positive on the
barrel and negative in the center).
Mode Selector:
Selects from two modes:
HARD: Faster, harder noise
reduction
SOFT: Softer, smoother noise
reduction
THRESHOLD Knob:
Controls the noise gate threshold.
Input Jack:
1/4” mono audio jack, for
connecting guitar.
Output Jack:
1/4” mono audio jack, for
connecting to an amplifier.
Footswitch and LED:
Tap to switch the unit on/off. The
LED will lit up when the effect is on.
f