Donner Dynamic Wah User Manual

The Dynamic Wah is a 100% analog
envelope filter for guitar and bass. Four
knobs onboard gives you fully access to
filter tone characters.
Introduction
Overview
Owner’s Manual
Precautions
READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a convenient
place for future reference.
Power Supply
Always use a DC 9V center negative AC
adapter. Use of an adapter other than
that specified could damage the unit or
cause malfunction and pose a safety
hazard.
Always connect the AC adapter to an
AC outlet that supplies the rated voltage
required by the adapter.
Disconnect the AC adapter from the AC
outlet when during lightning storms or
not using the unit for an extended
period.
Connections
Always turn off the power before
connecting or disconnecting. Make sure
to disconnect all cables and AC adapter
before moving the unit. This will help
prevent malfunction and damages.
Environment Considerations
Avoid using the unit in any of the
following conditions that could cause
malfunction:
●Extremely hot or cold places
●Under direct sunlight
●Magnetic fields
●Near heaters and other heat sources
●Sandy or dusty places
●Places that are extremely humid or
exposed to splashing water
●Places with lots of vibrations
Electrical Interference
Devices that are very susceptible to
interference or that emits powerful
electromagnetic waves (e.g. radios and
TVs) should not be placed near this unit,
as interference could occur.
Electromagnetic interference could
cause malfunction and could corrupt or
destroy data.
Always operate this unit at a suitable
distance from these devices.
Handling
Do not apply excessive force to the
switches and other controls, exposing
the unit to strong impacts, which could
cause it to break.
Do not put foreign objects or liquids into
the unit.
Never open the case or attempt to
modify the product in any way since this
can result in damage to the unit.
Clean only with a soft, dry cloth.
●Fully Controllable Envelope Filter
The Dynamic Wah is an envelope filter
(or autowah/touch wah) pedal with
detailed effect character control. With
the four knobs onboard you can easily
create the wah sound of your own: you
can make some wah sound like you’re
playing with wah-wah pedals, or go
deeper to create something unique and
inspiring.

Donner Dynamic Wah Specifications

General

Technology	Analog
Bypass	True Bypass
Output Impedance	10K Ohms
Type	Wah
Controls	Wah
Power Supply	9V DC

Summary

Precautions and Safety

Power Supply Guidelines

Use a DC 9V center negative AC adapter; disconnect when not in use or during storms.

Connection Safety

Turn off power before connecting/disconnecting cables and AC adapter to prevent damage.

Environmental Considerations

Avoid hot/cold places, direct sunlight, magnetic fields, humidity, and vibrations.

Electrical Interference Warnings

Keep unit away from devices emitting electromagnetic waves to prevent malfunction.

Handling and Care Instructions

Avoid excessive force, foreign objects, and opening the case; clean with a dry cloth.

Product Overview

Fully Controllable Envelope Filter

An envelope filter pedal with four knobs for detailed effect character control and unique sound creation.

Features and Components

Easy Controls and Wide Flexibilities

Features four-knob control (SENS, RES, DECAY, RANGE) for versatile wah sound creation.

Selected Components and Construction

Built with selected components, aluminum-alloy chassis, and true bypass for sound quality and reliability.

Connections and Controls Detailed

DC 9V Power Input

Requires a 9-volt DC regulated adapter with center negative polarity, 500mA.

SENS Knob Operation

Controls the filter's sensitivity or intensity.

RES Knob Operation

Controls the filter's sharpness.

DECAY Knob Operation

Controls how fast the filter frequency returns to its resting point.

RANGE Knob Operation

Controls the filter frequency range.

Guitar Input Jack

1/4" mono audio jack for connecting a guitar.

Amplifier Output Jack

1/4" mono audio jack for connecting to an amplifier.

Footswitch and LED Indicator

Tap the footswitch to turn the unit on/off; LED indicates status.