dooch Q-Drive NQ-0220-T - Specification of Recommended Wires and Terminal Screw

[
[CHAPTER 4 INSTALLATION]
4-5| DOOCHPUMP
4.3.4 Specifications of Recommended Wires and Terminal Screw
Thickness of Wires
mm² (AWG)
Drive
Capacity
Size of
Terminal
Screw
Fastening Torque
for Screw (N.m)
R,S,T U,V,W FG
0.75 kW M4 1.2~1.5 2(14) 2(14) 2(14)
1.5 kW M4 1.2~1.5 2(14) 2(14) 2(14)
2.2 kW M4 1.2~1.5 3.5(12) 3.5(12) 2(14)
4 kW M4 1.2~1.5 3.5(12) 3.5(12) 3.5(12)
5.5 kW M5 2.5 5.5(10) 5.5(10) 5.5(10)
7.5 kW M5 2.5 5.5(10) 5.5(10) 5.5(10)
11 kW M6 4~5 8(8) 8(8) 8(8)
15 kW M6 4~5 8(8) 8(8) 8(8)
18.5 kW M6 4~5 14(6) 14(6) 14(6)
22 kW M6 4~5 22(4) 22(4) 14(6)
※ Apply specified torque for fastening the terminal screw.
※ Weak fastening may cause malfunction and too strong fastening may destroy terminal
block.
※ Use 600V class wires.