1835-065-N-1-21
2
Quick Guide - 2
No factory setting
1 (255 area codes)
0 (OFF)
007 (7 sec)
1 (tone ON)
1 (19200 Baud)
0 (activates relay)
1 (Turned ON)
Single system
Issued by DoorKing
8-3000 Memory
2-Card w/Anti-Pass Back
Master Code - REQUIRED Programming
Number of Area Codes Allowed
Call-Up Operation, Interfacing with DKS 1816 or 1820 Systems Only
Resident Elevator Button Relay Time
Open Tone ON or OFF
RS-232 Speed Setting
Switch Input Feature
Elevator Control Feature
Single or Multiple Systems
DKS Data over IP Phone Number or System ID Number
Re-Program Memory Size, with/without Cards and Anti-Pass Back
(Only needed when New 1830 system is used with OLDER 1830 systems)
Live Transactions Viewing on a PC - ON or OFF
Section 3.2 Setup Entry System for PC Programming
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.2.6
3.2.7
3.2.8
3.2.9
3.2.10
3.2.11
29
30
30
30
30
31
31
31
31
32
32
*
60
*
78
*
36
*
15
*
85
*
18
*
75
*
04
*
59
*
95
Master
Switch ON
NOT Programmable from Software.
Program from System Keypad ONLY.
3.2.12 OFF33
*
19
Testing Option
Testing Option
OFF
Testing
DKS Data
over IP
62
62
62
6.1.7
6.1.8
6.1.9
*
56
*
29
*
55
Display DKS Data over IP Phone Number or System ID Number
Test Connection to DKS Data over IP
Turn DKS Data over IP OFF or ON (Automatically ON after programming 3.2.10)
Page # Factory Setting
Overview for Entry System Keypad Programming
Section Command
No factory setting
Factory message
Factory message
Factory message
Factory message
Programming Letters and Numbers from Keypad
Programming the User Message - 1835 System
Programming the Instruction Message - 1835 System
Programming the User Message - 1837 System
Programming the Instruction Message - 1837 System
Section 3.4 Programming Letters, Numbers and Messages
3.4.1
3.4.2
3.4.3
3.4.4
3.4.5
38
39
40
41
42
None
*
80
*
81
*
80
*
81
No factory setting
No factory setting
No factory setting
No factory setting
Programming Five-Digit Device Codes
Delete Device Codes
Enabling Facility Codes
Programming Facility Codes
Section 3.6 Programming Device Codes - 1833, 1835, 1837 Only
3.6.1
3.6.2
3.6.3
3.6.4
48
48
48
48
*
70
*
71
*
72
*
73
No factory setting
No factory setting
No factory setting
No factory setting
Programming the Anti-Pass Back Mode
Re-Sync All Devices
Re-Sync Individual Devices
Reset Facility Counter
Section 3.8 Anti-Pass Back
3.8.1
3.8.2
3.8.3
3.8.4
50
50
50
50
*
43
*
45
*
46
*
48
No factory setting
No factory setting
No factory setting
Programming Four-Digit Entry Codes
Delete Entry Codes
Entry Code Ranges
Section 3.7 Programming Four-Digit Entry Codes
3.7.1
3.7.2
3.7.3
49
49
49
*
02
*
02
*
12
Three (3) digits
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
No factory setting
1 (Pause ON)
Programming the Directory Code Length
Programming Directory Code AND 7-Digit Phone Numbers - No Area Code
Programming Area Codes
Programming Phone Numbers that need Area Codes
Programming Names - 1835, 1837 Systems Only
Deleting Individual Phone Numbers
Delete Names - 1835, 1837 Systems Only
Delete Area Codes
Display Phone Numbers - 1835, 1837 Systems Only
PBX Line Access Code Programming
Touch-Tone Dialing Pause
Section 3.5 Programming Phone Numbers and Names
3.5.1
3.5.2
3.5.3
3.5.4
3.5.5
3.5.6
3.5.7
3.5.8
3.5.9
3.5.10
3.5.11
44
44
45
45
46
46
46
47
47
47
47
*
20
*
01
*
24
*
41
*
66
*
01
*
65
*
24
*
06
*
09
*
27
060 (60 sec)
010 (relay 1 activates)
Touch-tone
010 (relay 1 activates)
Relay Strike Time
Talk Time
Tone Open Numbers
Switch Input Relay(s) Activation
Touch-tone / Rotary-dial
Rotary Dial-9 Relay(s) Activation
Section 3.3 General Programming using System Keypad
3.3.1
3.3.2
3.3.3
35
35
36
Relay 0: 01 (1 sec)
Relay 1: 01 (1 sec)
Relay 2: 01 (1 sec)
Relay 0: # # # #
Relay 1: 9 8 7 6
Relay 2: 5 4 3 2
*
03
*
08
*
05
3.3.4
3.3.5
3.3.6
36
37
37
*
50
*
07
*
51
To Next Page
Loading...
Need help?
General
