Maintenance Section
101
Every 10 Service Hours or Daily
You must read and understand the warnings and instructions contained in the Safety section of this manual,
before performing any operation or maintenance procedures.
Walk - Around Inspection -
Inspect
1. Inspect the operator’s compartment for loose
items and clean any mud or debris from the
floor plates.
2. Inspect the instrument panel for damage to the
display.
3. Test the horn and other warning devices for
proper operation.
4. Inspect the mast and lift chains for wear, broken
links, pins and loose rollers.
5. Inspect the carriage, forks or attachments for
wear, damage and loose or missing bolts.
6. Inspect the tires, valve stems and wheels for
cuts, gouges, foreign objects and loose or
missing nuts. Refer to “Tires and Wheels” in
“Every 10 Service Hours or Daily” section, if
repairs or replacement is necessary.
7. Inspect the overhead guard for damage, loose
or missing mounting bolts.
8. Inspect the hydraulic system for leaks, worn
hoses or damaged lines.
To Next Page
Loading...
Need help?
General
