Operation Section
47
Lift Truck Controls
Parking Brake
NOTICE
Do not operate the emergency switch while the
forklift is in motion, unless in an emergency case.
Using the parking brake in place of the service
brake damages the parking brake severely.
Parking brake activation - The parking
brake is automatically engaged with a
“clunk” after the vehicle stops.
Release of parking brake - press the
accelerator pedal lightly to release the
parking brake.
Service Brake Pedal
Service Brake - The service brake pedal is located
on the floor of the operator’s compartment.
Depress the service brake pedal to slow or
stop the lift truck. Drive circuit will be
interrupted while the pedal is depressed.
Release the service brake pedal to allow
the lift truck to move.
To Next Page
Loading...
Need help?
General
