Safety Section
-17-
Operator Restraint System (If
Equipped)
Warning Signs and Labels
Your DOOSAN lift truck has the following tipover
warning decals.
Make sure that you can read all safety signs. Clean or
replace these if you cannot read the words or see the
pictures. When cleaning the labels use a cloth, water
and soap. Do not use solvent, gasoline, etc. You must
replace a label if it is damaged, missing or cannot be
read. If a label is on a part that is replaced, make sure a
new label is installed on the replaced part. See you
DOOSAN Lift Truck dealer for new labels.
The most effective method of preventing serious injury
or death to yourself or others is to familiarize yourself
with the proper operation of the lift truck, to be alert, and
to avoid actions or conditions which can result in an
accident.
WARNING
Tipover can occur if the truck is improperly
operated. In the event of a tipover, injury or death
could result.
The “Survive in tipover” warning is located on the
overhead guard. It shows the proper use of the operator
restraint system.
Seat Adjustment
Move the lover, slide the seat to the desired position,
and release the lever.
Adjust the seat before operating the lift truck. After
adjusting, set the seat to make sure it is properly locked.
Do not adjust the seat while the truck is in motion.
WARNING
Do not pace your hand or fingers under the seat.
Injury may occur as the seat moves up and down.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
Need help?
General
