Doosan DCT2PS - Page 19

19
VIBRATION LEVEL SAFETY INFO
The vibration level of the hammer during use is over 2.5m/s². The operator must adapt his daily working time, in accordance
with the vibration levels of tools used. It is absolutely forbidden to absorb more vibration on a daily basis, than is permitted by
regulation.
• Exposure points per hour. The number if exposure points for every hour of exposure time for the individual tool or process.
• Time to reach EAV (exposure action value). This is the total exposure time required for the individual tool or process, before
the exposure action value (2.5 m/s
2
A(8) or 100 points) is reached.
• Time to reach ELV (exposure limit value). This is the total exposure time required for the individual tool or process, before
the exposure limit value (5 m/s
2
A(8) or 400 points) is reached.
Model Vibration
magnitude
Exposure
points
TIme to reach EAV
2.5 m/s
2
A(8)
TIme to reach ELV
5 m/s
2
A(8) hours
m/s
2
r.m.s per hour hours minutes hours minutes
DCT2PS 3,1 19 5 12 20 49
DCT3PS 9 162 0 37 2 28
DCT5PS 7 98 1 1 4 5