ENGINE DISASSEMBLY
- 50 -
3.1.46. Crank shaft
z
Remove the main bearing cap fixing bolts in the
opposite direction of assembling.
z
Maintain the removed bearing caps in the order
of cylinders.
z
Temporarily install the bolts at the both side of
crankshaft, and lift the shaft with a rope.
NOTE :
Do not mingle with the metal bearings and
bearing caps randomly. To prevent mixing,
temporarily assemble the metal bearings to the
corresponding bearing caps in turn.
3.1.47. Oil spray nozzle
z
Unscrew the fixing bolt and remove the oil spray
nozzles.
EAMD047S
To Next Page
