What to do if the MIL Lamp illuminates and remains ON in Doosan Forklifts?
If the MIL Lamp turns on while operating your Doosan Forklifts, safely park the truck, stop the engine, and then proceed with further checks.
Detailed specifications and torque values for the control valve.
Specifications for hydraulic pump, sideshift cylinder, lift cylinders, and tilt cylinder.
Specifications for steering wheel, priority valve, and steering unit.
Specifications for control groups, shoe brakes, and engine shutdown systems.
Explains the operation and symbols of the Operator Sensing System.
Provides an overview of the hydraulic system's operational principles.
Covers general troubleshooting, visual inspections, performance tests, and oil temperature issues.
Procedures for checking and adjusting relief valves and removing air from lift cylinders.
Covers steering system air removal, pressure checks, and bearing/axle adjustments.
Procedures for brake system air removal, pedal adjustments, and parking brake tests.
To Next Page
General
