Need help?Do you have a question about the Doosan DL06 and is the answer not in the manual?
Detailed safety rules to prevent accidents and ensure safe practices.
Detailed technical specifications of the DL06K engine model.
Engine power output and torque specifications for different models.
Graphical representation of engine performance curves.
Diagrams illustrating the engine assembly and its components.
Information on identifying engine model and serial number for ordering parts.
Description of diagnostic tools and procedures for troubleshooting.
Overview of the DL06K engine's design and operating principles.
Explanation of the Electronic Control Unit's (ECU) function and connection.
Description of the common rail fuel injection system and its operation.
Description of the Tier4 interim emission reduction systems (DOC, DPF).
Explanation of the forced lubrication system, oil flow, and components.
Troubleshooting guide for common engine starting and operation issues.
Step-by-step instructions for disassembling engine components.
Procedures for inspecting and measuring major engine components.
Step-by-step instructions for reassembling engine components.
How the common rail system operates for optimal engine performance.
Detailed explanation of high-pressure system parts: pump, rail, sensors.
Explanation of injector operation, fuel control, and return fuel flow.
Identification and location of various electrical components on the engine.
Wiring diagrams for the electric control unit's connectors and harness.
Detailed pin assignments and circuit names for the ECU.
Description of the DPF and EGR systems for NOx reduction.
Explanation of the Diesel Particulate Filter (DPF) and its regeneration process.
Important cautions for handling and assembling the DPF system.
How to confirm fault codes using the diagnostic device.
List of engine fault codes and their corresponding occurrence conditions.
Preparations required before initial engine commissioning or overhaul.
Procedures for breaking in a new or overhauled engine.
Checks to perform after starting the engine, including oil pressure and warning lamps.
Special considerations for operating the engine in winter conditions.
Routine maintenance and care procedures for the engine.
Maintenance schedule and procedures for the engine cooling system.
When and how to adjust valve clearance.
General descriptions, specifications, and troubleshooting for the cooling system.
Maintenance of the engine lubrication system.
Specification, construction, and maintenance of the turbocharger.
Maintenance procedures for the air cleaner.
Checking and changing fan belts based on wear and tension.
Torque specifications for major engine parts during assembly.
Table of standard values and limits for engine assembly inspections.
To Next Page
General
