OP000754Operating Controls
2-12
11. Hour Meter
A LCD Meter that records total time. When engine is
running, the hourglass icon blinks every four seconds. This
shows that the hour meter is working.
12. Hazard Warning Light Switch
This warning light is used when the equipment is stopped
due to a malfunction or when an emergency occurs. When
this switch is pressed the directional indicator lights in front
and back of the machine light up and flash, warning others
in the area. At the same time the directional indicator lights
on the instrument panel will turn "ON" to warn the operator.
The hazard warning lights operate independent of the
starter switch.
O. In this position, this switch turns "OFF" hazard
warning lights.
I. In this position, this switch turns "ON" all turn signals
and they flash simultaneously.
NOTE: Hazard warning lights will function with starter
switch in "OFF" position.
FG004112
Figure 19
2665C
O
I
Figure 20
To Next Page
Loading...
