Doosan DL160 - Kick-down Switch (Two Places)

OP000754Operating Controls
2-24
2. Kick-down Switch (Two Places)
Kick-down Switch Function - When transmission is in 2nd
gear, pressing this switch (Figure 50) will shift transmission
into 1st gear. This will allow the driver to perform a quick
digging movement.
Kick-down function range:
• Automatic: 2nd, 3rd, 4th.
• Manual: 2nd.
NOTE: Kick-down is "RELEASED" when transmission
is placed in "NEUTRAL" position or the switch is
pressed again.
A second kick-down switch (Figure 49) is on the end of the
transmission lever.
3. Horn Button (Two Places)
Pressing the left button at the tip of the pilot control valve
lever (joystick) (Figure 51) or the button at the end of the
combination switch (Figure 52) will sound the horn.
NOTE: Starter switch must be "ON."
FG013048
Figure 49
Figure 50
AHO0900L
FG013047
Figure 51
Figure 52
AHO0890L