OP000754
2-39
Operating Controls
2. Blower Fan Switches
These switches are used to control the speed of the blower
fan.
A. "LO" Switch - Used for low blower speed.
B. "MID" Switch - Used for intermediate blower speed.
C. "HI" Switch - Used for high blower speed.
NOTE: If you do not select a blower speed the heater
and air conditioner will not work.
3. Temperature Control Switch
The temperature control consists of 24 stages. An LED is
turned "ON" for every three stages. Whenever pushing it, it
changes in stages. Pushing it continuously, it changes
continuously.
A. "COOL" Switch - Lowers the temperature.
B. "WARM" Switch - Raises the temperature.
LED COLOR STATUS
Green LED - Air conditioner. Full green, maximum
operation of air conditioner.
Red LED - Heater. Full red, maximum operation of
heater.
4. Selector Switch for Wind Direction
A. Used to direct air flow to upper portion of operator's
cabin.
Figure 83
HAOC940L
Figure 84
HAOA860I
FG006507
Figure 85
To Next Page
