SP002050Wheel Loader Safety
Page 10
VISIBILITY INFORMATION
A rear view camera and mirrors ensure that visibility around the
machine, from the operator's seat, meets the latest ISO
standards for the region or marketplace that machine is sold into.
NOTE: These devices may vary from one region to another,
depending upon local and regional regulations. If a
machine is moved or sold into another region or
marketplace, it is the owner's responsibility to make
sure it complies with all regulations.
Your machine may be equipped with visual aids; mirrors or
cameras, but even with these aids, there still may be blind spots
which cannot be seen from the operator's seat, so always be
careful when operating.
Adjust the visual aids for the best visibility criteria for all areas
around the machine.
When swinging or backing up, press button to change display
mode on monitor so you can check rear and side of machine.
Before moving the machine, look around the work site through
mirrors and monitor to confirm that no one is around the
machine.
FG015658
1
1
1. Mirror
Figure 1
WARNING
Failure to check for and clear people from the surrounding
area of a machine could result in serious injury or death.
The operator should make sure that visual aids (mirrors and
camera (s)) are in proper working condition. Look for any
possible blind spots.
To Next Page
Loading...
