EasyManua.ls Logo

Doosan DL400 - Clothing and Personal Protective Items; Breathing Masks, Ear Protection; Vibration Level Information

Doosan DL400
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SP002050
Page 13
Wheel Loader Safety
Inside Operator's Cabin
When entering the operator's cabin, always remove all mud and
oil from the soles of your shoes. If you operate the accelerator
and brake pedals with mud or oil stuck to your shoes, your foot
may slip and this may cause a serious accident.
Clean grease and dirt from pedals and controls. This contributes
to safe operation. Cleaning also provides an opportunity to
inspect equipment. Minor damage can be repaired or corrected
before major problems result.
Keep cab floor and consoles free of tools and personal items.
After using the ashtray, make sure that any matches or
cigarettes are properly extinguished, and be sure to close the
ashtray. If the ashtray is left open, there is a danger of fire.
Do not stick suction pads to the window glass. Suction pads act
as a lens and may cause fire.
Do not leave lighters laying around the operator's cabin. If the
temperature inside the operator's cabin becomes high, there is a
danger that the lighter may explode.
Do not use cellular telephones inside the operator's cabin when
driving or operating the machine. There is a danger that this may
lead to an unexpected accident.
Never bring any dangerous objects such as flammable or
explosive items into the operator's cabin.
To ensure safety, do not use the radio or music headphones
when operating the machine. There is a danger that this may
lead to a serious accident.
When operating the machine, do not put your hands or head out
of the window.
When standing up from the operator's seat, always place
transmission neutral lock lever in the "LOCK" position and set
pilot cutoff switch to "O" (OFF) position. If you accidentally touch
the work equipment levers when they are not locked, the
machine may suddenly move and cause serious injury or
damage.
When leaving the machine, lower the work equipment
completely to the ground, set transmission neutral lock lever in
the "LOCK" position, set pilot cutoff switch to "O" (OFF) position,
"APPLY" parking brake, and shut down engine. Use the key to
lock all the equipment. Always remove key and take it with you.

Related product manuals