EasyManua.ls Logo

Doosan DL400 - Asbestos Dust Hazard Prevention; Mounting and Dismounting

Doosan DL400
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SP002050Wheel Loader Safety
Page 14
Clothing and Personal Protective Items
Secure long hair, and avoid loose clothing and jewelry. These
items have the tendency to catch on controls or protrude into
parts and cause serious injury or death.
Do not wear oily clothes. They are highly flammable.
Full eye protection, a hard hat, safety shoes and gloves may be
required at the work site.
While working on the machine, never use inadequate tools.
They could break or slip, causing injury, or they may not
adequately perform intended functions.
Breathing Masks, Ear Protection May Be
Required
Do not forget that some risks to your health may not be
immediately apparent. Exhaust gases and noise pollution may
not be visible, but these hazards can cause disabling or
permanent injuries.
NOTE: The equivalent continuous A-weighted sound
pressure level at the workstation for this machine is
given in the operation manual.
Measurement is obtained on a dynamic machine
following the procedures and cab conditions as
described in ISO 6396.
NOTE: The guaranteed sound power level emitted by the
machinery for this machine is given in the operation
manual.
Measurement is obtained on a dynamic machine with
the procedures as described in 2000/14/EC.
Vibration Level Information
Hands/Arms: The weighted root mean square acceleration to
which the hands/arms are subjected, is less than 2.5 m/s
2
.
Whole body: The weighted root mean square acceleration to
which the whole body is subjected, is less than 0.5 m/s
2
.
Measurements are obtained on a representative machine, using
measuring procedures as described in the following standard:
ISO 2631/1. ISO 5349, and SAE J1166.
HAOA020L
Figure 2