SP002050Wheel Loader Safety
Page 8
Learn the Signal Words Used with the
Safety Alert Symbol
The words "CAUTION", "WARNING", and "DANGER" used
throughout this manual and on decals on the machine indicate
degree of risk of hazards or unsafe practices. All three degrees of
risk indicate that safety is involved. Observe precautions indicated
whenever you see the Safety Alert "Triangle", no matter which
signal word appears next to the "Exclamation Point" symbol.
Safety precautions are described in SAFETY from page -9 on.
DOOSAN cannot predict every circumstance that might involve
a potential hazard in operation and maintenance. Therefore the
safety messages in this manual and on the machine may not
include all possible safety precautions. If any procedures or
actions not specifically recommended or allowed in this manual
are used, you must be sure that you and others can do such
procedures and actions safely and without damaging the
machine. If you are unsure about the safety of any procedures,
contact a DOOSAN distributor.
CAUTION
This word is used on safety messages and safety labels and
indicates potential of a hazardous situation that, if not
avoided, could result in minor or moderate injury. It may also
be used to alert against a generally unsafe practice.
WARNING
This word is used on safety messages and safety labels and
indicates potential threat of a hazardous situation that, if not
avoided, could result in serious injury or death. It may also be
used to alert against highly unsafe practice.
DANGER
This word is used on safety messages and safety labels and
indicates an imminent hazard of a situation that, if not
avoided, is very likely to cause death or extremely serious
injury. It may also be used to alert against equipment that may
detonate or explode if handled or treated carelessly.
To Next Page
Loading...
