EasyManua.ls Logo

Doosan DP158LCF - Coolant Standards and Specifications

Doosan DP158LCF
160 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4. Regular inspection
45
Use of Genuine Parts
An engine consists of many parts which are mechanically
harmonized. To prevent engine faults in advance and use
engines with best performance for a long period, mainte-
nance and replacement of expendable parts should be
conducted regularly.
Use of genuine parts is recommended. Using unautho-
rized or remanufactured parts may cause critical damage
and faults to engine for which Doosan shall not be held
liable.
Fuel lines for leaks
○
Drain Fuel filter / Water separator
○
Check of fuel stop lever
○
Engine Clean fuel pre-filter
○○
Replace Fuel filter
●●
Replace Water separator filter
●●
Drain Water & Sediment from fuel
tank
○
Check of Injectors, replace if nec-
essary
a
○
Replace Fuel Hoses, Clamps
●
Electrical system
Engine alarms
○
Check of battery charging
○
Magnetic pick up and adjust
○
Cylinder head
Cylinder head valve and valve
seats
○
Check of valve clearance
If neces-
sary
a. If the sulfur content of fuel is > 0.02wt%, the changer or check intervals should be halved.
Check Points Daily
Inspection interval (Hours)
Remark
First 50 200 400 800 1,600 3,200 1Year 2Year

Table of Contents