20
1. Place thumb through cover opening and
press the harness release lever at the front
of seat.
2. Pull both shoulder straps simultaneously
to loosen.
3. Press the red button to release the buckle.
4. Place child into the child restraint.
PREPARING CHILD RESTRAINT
TO FIT YOUR CHILD
NOTE: Remove insert
if not required.
PULL TO
TIGHTEN
DO NOT LEAVE CHILDREN UNATTENDED IN THE CAR.
WARNING
PRESS
5. Fasten buckle (see page 22).
6. Pull the adjuster strap at the front of the seat
until the harness straps lay rmly against
the child.
LOOSEN
Preparing seat for your child
To Next Page
Loading...