EasyManua.ls Logo

Dorel Solo - Cleaning Buckle

Dorel Solo
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
CLICK!
repeat until
CLEANING BUCKLE:
Place the buckle unit under running water (40
degrees Celsius), (Figure 2). Let the water ow
through the mouth of the buckle for one minute.
Simultaneously latch and unlatch the tongues into
the buckle several times until a strong audible click
is heard (Figure 2a).
If you still cannot hear a strong audible click after
latching the buckle several times. Repeat steps
above.
DO NOT oil any part of the buckle.
Allow buckle to completely dry before retting.
If the buckle does not return to original working order, contact Dorel Australia
Customer Service on 1300 809 526.
If you are a New Zealand customer, please contact IGC Dorel New Zealand
Customer Service on 0800 628 000.
REFITTING BUCKLE:
Ret crotch buckle ensuring RED button is facing
out.
Place the two metal plates back and slide them
back into position (Figure 2b).
Pull the buckle up to make sure that it is tted
properly and that the metal plates are secure.
2
2a
2b
Care and maintenance

Related product manuals