7
Operating and locking device elements Summary of control elements type P/S/A
Program switch settings
KTV P KTV S KTV A
Summer
The revolving door stops at its starting position and the drive is
unlocked. The door wings can be rotated manually.
If foldable wings have been installed, the wings can be folded to the side in this program switch setting
(for example, for ventilation).
Night / bank
(Optional)*
not available not available
The revolving door is locked in its locking position
by the electric locking device. Access to the
revolving door is controlled using a door opener,
card reader, etc. When an authorized person
tries to open the door, the interior lighting will
turn on and the revolving door will rotate for a
preset number of revolutions. The revolving door
will then return to its locking position and lock
the entry. After a specified time, the interior
lighting will switch off.
To Next Page
Loading...
